What's the lightest OTC transmission jack for your vehicle? I've spent too much time perusing Amazon and happened to find some quality jacks that will fit into the majority of trunks and are convenient when you need to lift a transmission or do some work yourself. As I've just done a lot of research on thistopic, I thought it was time to share my findings with you in one location.
More details: pettersolberg => https://www.pettersolberg.com/
Take a look at these 6 Top OTC Transmission Jack Reviews
There have been a variety of transmission jack brands over the time. However there are only a few of them offer the most reliable OTC Transmission Jack reviews. You may not have the time to go through their products or client reviews. We've provided you with our comprehensive review of the best 6 OTC transmission jack reviews in this article.
1. OTC 5019A 2,200 lb. Capacity Low-Lift Transmission Jack
This OTC 2,200 lb. Capacity low-lift transmission jack is the perfect tool for aerodynamic trucks with lower ground clearance! The low height of 8-1/4 inches allows it to be used to service transmissions on heavy duty Class 7 and 8 trucks. The pump handle can be swiveled to allow the ease of use in tight working areas. The jack has a quick-acting pump which raises the lifting arm quickly and an angle-adjustable mounting plate that can be adjusted with the turn of a wrench.
This adapter fits on almost all heavy-duty Class 7 and 8 trucks. Specifications: Min. Height: 8-1/4 in., max. Height - 36-1/2 in., maximum. Forward tilt - 15 deg., max. Backward tilt - 20 deg., max. Side tilt (either either) 12 degrees. Overall length: 52 inches. Width 32-1/2 inches.
2. OTC 1522A Transmission Jack Class 7 and 8 trucks
OTC's rugged, stable, 2000 lb. OTC's 2000 lb. Capacity transmission jack is ideal for lifting large transmissions like the Eaton Fuller Roadranger transmissions, which are used in all class 7 and 8 trucks (adapter included). Since it's low-profile, it can be utilized under most trucks with the lowest clearance. It is perfect for clutch repair.
Safety overload protects the jack from being utilized beyond the capacity. The safety bypass protects the hydraulic cylinder from damages. The handle of the pump is able to be rotated 360° so that it is easy to use in any location. It has a minimum. Maximum height of 7/8 inches. 35-1/4 Inches in height, max. Forward tilt of 24 ° and maximum backward tilt of 18 degrees. The maximum side tilt is 11° on either side, with an overall length 43-1/2 inches (and overall width of 26 inches)
3. OTC 1728 Capacity Air-Assisted High Lift Transmission Jack
Transmission jacks are able to withstand some abuse but they don't have to be expensive. OTC provides durable, sturdy transmission jacks with prices which are unbeatable. This model is specifically designed for heavy lifting. This model is great for high-end transmissions, like the Eaton Fuller Roadranger transmissions found in most class 7 and 8 trucks (adapter included). It's perfect for clutch repair because it's low profile design that can be tucked under the majority of trucks.
Safety overload will stop you from using the jack past its capacity. The safety bypass safeguards the hydraulic cylinder from harm. The pump handle is rotated 360 degrees to make it easy to use in any situation. There are also 3-1/2" ball bearing swivels that enable easy positioning. Minimum height - 6-7/8"; Maximum Height - 35-1/4"; Forward tilt angle: 24 degrees; Backward tilt angle: 18 degrees; Side tilt (either side): 11 degrees; Overall length: 43-1/2"; Overall width: 26".
4. OTC 1521A 1000 lbs Capacity Low-Lift Transmission Jack
The OTC 1521A is 1000 lbs. The High Lift Transmission Jack is equipped with our universal mounting head that tilts from side to side and front to back. The safety chain helps secure the load as it is moving through the shop.
It has a broad wheel base that has four swivel-casters with swivels and two grips on the handle that make it easy to position underneath the vehicle. Safety overloads are not allowed and the maximum lifting height of the vehicle is 27 inches. The floor space measures 43 inches by 42 inches. The release screw-on lever of the hydraulic ram allows for a controlled, slow descent.
5. OTC 5078 2000 lbs Capacity High Lift Air-Assisted Transmission Jack
OTC 5078 2000 lbs high-lift transmission has an air metered, foot-operated pump that permits easy lifting and control of the load on the transmission during the installation. The rugged, heavy wall tubing and oversized base help to improve the overall stability of the unit . The lift is supported by three adjustable legs to provide additional durability.
An adapter is available to automate transmissions of the Allison 500 and 600 series. Other features include: min. Height - 41-1/2 inches; max height - 65 inches; maximum forward tilt - 50 degrees; maximum backward tilt - 38 degrees; maximum side tilt (side to side) - 14 degrees; leg width - 46 inches. OTC's Lifetime Marathon Guarantee covers you.
6. OTC Tools 223196 Transmission Jack Mounting Adapter Kit
This kit is able to be used in conjunction with the OTC 1728 High-Lift Transmission Jack, 1000 pound Capacity. This kit is great for larger standard transmissions having irregularly shaped oil pans. It has four adjustable arms to stabilize transmissions with rounded bottoms. Part number 223196
This adapter kit was created to let you handle bigger transmissions by using your high-lift air-assisted transmission jack, which can lift up to 1000 pounds. It's perfect for larger standard transmissions with unusually-shaped oil pans. The kit features four arms that can be adjusted to help maintain the stability of transmissions with round bottom surfaces.
Conclusion
If you need to replace a transmission on a car make sure you use the most effective OTC transmission jack available. They're indispensable for the job and, when you purchase any product is a right to expect it will meet your requirements. We've covered it today, they're an important aspect of the equation. If it weren't for them, you might as well abandon the idea and call for a tow truck. Although it's true that a lot of people will not be able to do their own work with their assistance, there are certain things that make a huge difference in their efficiency.
Copyright by Petter Solberg
https://www.facebook.com/PetterSolbergWRX
https://www.instagram.com/petterwrc03/
https://mobile.twitter.com/petter_solberg
https://www.pinterest.com/pettersolbergcom/
https://www.youtube.com/user/PetterSolbergRally
https://www.pettersolberg.com/
Mitandersfors, Sweden
+46974652988
Born: November 18, 1974
Petter Solberg is a Norwegian former professional rally and rallycross driver. Solberg debuted in the World Rally Championship in 1998 and was signed by the Ford factory team in 1999. The following year, Solberg started his successful partnership with the Subaru World Rally Team.